Komatsu HB215LC-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 146 / 492

SET AUTO-DECELERATION
On “Auto Deceleration Setting”, you can configure the auto-de-
celeration function.
1.
Select “Auto Deceleration Setting” (4) on “Machine Setting”
menu (b) screen, then press the switch F6.
2.
The screen changes to “Auto Deceleration Setting” selec-
tion menu screen.
• ON: Use the auto-deceleration function
• OFF: Not use the auto-deceleration function
On this setting screen, it is possible to perform the follow-
ing operations with switches F3 to F6.
F3: Moves to the next item (1 line below). When it is on the
last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is
on the first line, it moves to the last line.
F5: Cancels the setting change and returns the screen to
the Machine Setting screen.
F6: Changes the setting and returns the screen to the Machine Setting screen.
AUTO IDLE STOP TIMER SETTING
The auto idle stop function stops the engine automatically at the set time when the engine is operated continu-
ously at idle with the lock lever in LOCK position.
The auto idle stop function operates only when the following conditions are satisfied.
• The engine is running normally.
• The lock lever is in LOCK position.
• The engine coolant and hydraulic oil are not overheating.
• The engine is not in automatic warm-up operation.
• The machine is not in the L mode.
You can set the time to operate the auto idle stop function on "Auto Idle Stop Timer Setting".
1.
Select “Auto Idle Stop Timer Setting” (5) on “Machine Set-
ting” menu (b) screen, and then press the switch F6.
EXPLANATION OF COMPONENTS OPERATION
3-74