MAINTENANCE
OUTLINE OF SERVICE
4-7
OIL SAMPLING
q
Sampling interval
250 hours: Engine
500 hours: Other components
q
Precautions when sampling
q
Make sure that the oil is well mixed before sampling.
q
Perform sampling at regular fixed intervals.
q
Do not perform sampling on rainy or windy days when water or dust can get into the oil.
For further details of KOWA, please contact your Komatsu distributor.
STORING OIL AND FUEL
4
q
Keep indoors to prevent any water, dirt, or other impurities from getting in.
q
When keeping drum cans for a long period, put the drum on its side so that the filler port of the drums is at the
side to prevent moisture from being sucked in.
If drums have to be stored outside, cover them with a waterproof sheet or take other measures to protect
them.
q
To prevent any change in quality during long-term storage, be sure to use in the order of first in - first out (use
the oldest oil or fuel first).
FILTERS
4
q
Filters are extremely important safety parts. They prevent impurities in the fuel and air circuits from entering
important equipment and causing problems.
Replace all filters periodically. For details, see the Operation and Maintenance Manual.
However, when working in severe conditions, replace the filters at shorter intervals according to the oil and fuel
(sulfur content) being used.
q
Never try to clean the filters (cartridge type) and use them again. Always replace with new filters.
q
When replacing oil filters, check if any metal particles are attached to the old filter. If any metal particles are
found, contact your Komatsu distributor.
q
Do not open packs of spare filters until just before they are to be used.
q
Always use Komatsu genuine filters.
Содержание Galeo PC800LC-8
