Komatsu D51EXi-24, Руководство по эксплуатации и техническому обслуживанию, Страница: 162 / 194

5.
On “Section” tab, press “Color”, and change “Section/
Profile line color :” or “Show grade transitions :”.
You can change the colors of the lines or points individual-
ly. You can set display/on-display of the slope-change
point marker displayed in the section view and profile view
by checking or unchecking the check box.
6.
Press “Ok”.
METHOD FOR SETTING AS-BUILT SURFACE DISPLAY
When changing the setting of as-built surface display, perform the following procedure.
1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “View” menu, press “Display options” and “As-built sur-
face...” in order, and select.
3.
Select or input necessary options on “As-built Surface”
screen, and press “Ok”.
4.
Press any “Interval” button, and change the color.
REMARK
You can use 13 colors in total for cut/fill operation and
number of operation (number of passes).
5.
Press “Ok”.
METHOD FOR SETTING POINT DISPLAY
When changing the display setting of the points, perform the following procedure.
1.
On the main window, press “iB logo key” and display the main menu.
AJD02670
AJD02671
AJD02672
VIEW MENU HANDLE CONTROL BOX
4-78