Komatsu D51EXi-24 Скачать руководство пользователя страница 152

Страница: 152 / 194

The message screen is displayed.

Press “Ok”.

On the main window, press “iB logo key” and display the
main menu.

On “Tools” menu, press “Supervisor”, and select a menu to
operate.

METHOD FOR LOCKING MENUS, BUTTONS AND SCREEN ITEMS

You can lock the menu, buttons, and screen items of 3DMC so that they cannot be operated.

• Menu

Menus selected from“ File”, “Control”, “Tools”, and “View”

• Button

Buttons displayed on various screens
(Example) “Edit” button, etc. which is displayed on “Machine files” screen

• Screen items

Alphanumeric input section or drop-down menu

Enable the supervisor mode.
For the method for setting the supervisor mode, see “METHOD FOR USING SUPERVISOR MODE”.

On the main window, press “iB logo key” and display the
main menu.

On “Tools” menu, press “Supervisor”.

Press and select an item to lock (“Lock menus”, “Lock but-
tons”, or “Lock screen items”).

AJD02652

AJD02653

TOOLS MENU

HANDLE CONTROL BOX

4-68

Содержание D51EXi-24


































































































































































































Результаты поиска

Содержание D51EXi-24

Отзывы:

Бренды по названию

Популярные бренды

Komatsu D51EXi-24, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание D51EXi-24

Отзывы:

Бренды по названию

Популярные бренды