Komatsu D51EX-24, Руководство по эксплуатации и техническому обслуживанию

Страница: 92 / 382

REMARK
• Immediately after turning the starting switch to ON position and while the engine is running, DEF level cau-
tion lamp (1) lights up in white. However, this does not indicate abnormality.
• In cold weather, DEF level cannot be detected and DEF level caution lamp (1) lights up in white for approxi-
mately 1 hour. However, this does not indicate abnormality.
• Even if DEF level caution lamp (1) does not light up in white, it may take a long time for DEF level gauge to
display the correct position.
Note that the following cases are not abnormal:
• When DEF is added while the starting switch is kept at ON position.
• When the starting switch is turned to ON position immediately after adding DEF (within approximately
30 seconds).
Before adding DEF, turn the starting switch to OFF position. Wait for a while after adding, then turn the
starting switch to ON position.
MONITOR SWITCHES
(1) Function switch
(2) Buzzer cancel switch
(3) Operating mode selector switch (4) Pedal mode selector switch
(5) Gear shift mode selector switch
(6) Reverse travel speed setting switch
FUNCTION SWITCHES AND GUIDANCE ICONS
• Function switches (1) at the bottom of the monitor display
consist of 6 switches (F1 to F6). The function of each
switch differs according to the content of each screen.
• On each screen, you can confirm the function of switches
(1) by guidance icons (2) displayed on top of the switch.
• While guidance icon (2) is not displayed, switch (1) does
not function even if it is pressed.
• Even if guidance icon (2) is pressed, it does not function.
Press function switch (1) directly under guidance icon (2)
to operate the function.
When the monitor display shows the standard screen, the types of guidance icons and functions of function
switches are as follows:
For the details of each function, see the detailed explanation of each item.
EXPLANATION OF COMPONENTS OPERATION
3-36