Komatsu D375A-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 435 / 466

REMARK
Open oil filler port (F) before draining or adding engine oil by
using this coupler.
NOTICE
• If the quick coupler is not installed securely, oil may
be sent flying around during refilling. For safety, un-
lock lock (L) of cover at box, then close the cover and
operate.
• Even when draining or adding engine oil by using this
coupler, be sure to replace the engine oil filter car-
tridge after draining and check the engine oil amount
after adding.
EVERY 1000 HOURS MAINTENANCE
Maintenance for every 250 and 500 hours services should be performed out at the same time.
METHOD FOR CHANGING OIL IN POWER TRAIN CASE AND CLEANING
STRAINER
(including transmission case, torque converter case, and bevel gear case)
k k
WARNING
• Immediately after the engine is stopped, its parts and oil are still very hot, and may cause burn in-
jury. Accordingly, wait until they have cooled down before starting the work.
• The undercover is a heavy object. Do not open or close the cover just under it. When removing the
bolts, perform the work from the rear of the cover so that you can easily get out of the way.
Refill capacity: 150 ℓ
Items to be prepared
• Container to catch the drained oil: 150 ℓ or more
If the operating hours do not reach 500 hours in 12 months, replace the engine oil and filter cartridge every 12
months.
If the operating hours reach 500 hours within 12 months, replace it every 500 hours.
1.
Remove the cover under rear of the machine and put a
container just under it to catch the drained oil.
ATTACHMENTS AND OPTIONS MACHINE WITH MINING SPECIFICATION
6-39