Komatsu D155AX-8E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 145 / 420

SET GUIDE LINE DISPLAY MODE
1.
Select the “Guide Line” on the “Screen Adjustment (Cam-
era)” screen.
2.
Press switch F6.
3.
The “Guide Line” setting screen is displayed.
• OFF: Guide lines (Outline (A), Center Line (B)) are not
displayed.
• Outline: Only outlines (A) that indicate the machine
width and the distance from the rear end of the ma-
chine are displayed.
• Center Line: Only machine center line (B) is displayed.
• All : Both of Outline (A) and Center Line (B) are dis-
played.
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line.
F5: Cancels the setting and returns to the “Screen Adjustment
(Camera)” screen.
F6: Change the setting and returns to the “Screen Adjustment
(Camera)” screen.
CLOCK ADJUSTMENT
The “Clock Adjustment” menu is used to change the setting of the clock displayed on the standard screen of the
monitor.
1.
Select “Clock Adjustment” (3) on the “Monitor Setting”
menu screen.
2.
Press switch F6.
OPERATION EXPLANATION OF COMPONENTS
3-83