Komatsu A31001, Руководство по эксплуатации и техническому обслуживанию

Страница: 168 / 376

“Below”: When the work equipment is below the Starting point or Linework, a warning is displayed in this mode.
“Above/Below”: When the work equipment is above or below the Starting point or Linework, a warning is dis-
played in this mode.
“Outside”: Sets the place out of Avoidance Data to Avoidance Data.
“Off”: Disables the Surface mode.
Tap RETURN button to return the screen to the previous screen.
AS-BUILT VIEW SETTINGS
As-built View is the current terrain displayed in 2D. By setting As-built View, state of construction can be dis-
played in color, and it can be a guide for the progress and accuracy of construction.
SELECT AS-BUILT VIEW
In the column of “As-built View” on “Project File Settings”
screen, select a display out of 2 kinds display of “Cut Fill” and
“Pass Count”.
CUT FILL SETTINGS
The distance from the bucket edge to Surface can be displayed
in color. If you want to grasp the distance from the bucket edge
to Surface in digging operation, this setting is recommended.
For setting the display color by Cut Fill setting of As-built View,
see “METHOD FOR SETTING CUT FILL COLOR SELEC-
TION”.
CONTROL BOX SETTING
7-52