Komatsu A31001, Руководство по эксплуатации и техническому обслуживанию

Страница: 125 / 376

2.
The screen changes to the screen for inputting Project File
name. Input the file name to be created newly, and tap
“OK” button.
3.
The file name of the newly created Project File is added to
“Project Files” list.
4.
Tap RETURN button to return the screen to the previous
screen.
METHOD FOR COPYING PROJECT FILE
You can create the copy of Project File.
Connect the USB flash drive to the control box.
If the Project File is not created newly, Project File is not displayed in the list.
Copy the Project File from the USB flash drive to the control box.
REMARK
If a large capacity of data is saved in the control box, hard disk is used fully and the control box may not operate
normally. Delete the unnecessary data frequently.
1.
Tap “Project Files” button to select the Project File.
2.
Tap “Copy” button on “Project Files” screen.
The screen changes to “Copy Files” screen.
SETTING CONTROL BOX
7-9