Komatsu 37BF50111, Руководство по эксплуатации и техническому обслуживанию

Страница: 56 / 244

SAFETY LOCKS
54
3 - Locking of the safety device (8) for the inhibition of the
equipment control.
3.1.2 EXCAVATOR LOCKS (if installed)
IMPORTANT
q
When travelling on roads, always position the excavator
following the longitudinal axis of the vehicle, apply the
safety locks and lock the equipment control by shifting
the safety device lever to the lock position.
The excavator safety locks must be used for travelling on
roads and applied by proceeding as follows.
q
After folding the bucket completely, apply the lock (1) be-
tween boom and arm, the connection lock (2) between boom
and sliding plate, the centre pin (3) that locks the sliding
plate on the frame, raise the stabilizer supports completely
and engage the relevant safety chains (4).
RWAA13200
8
RWA37410
RWA23280
1
2
3
4