Komatsu 37BF50111, Руководство по эксплуатации и техническому обслуживанию

Страница: 232 / 244

HAND & FOOT CONTROL SYSTEM
230
6.5.1.2 WORK EQUIPMENT CONTROL PEDALS (LOADER ARM AND BUCKET)
WARNING
q
Before carrying out any manoeuvre with the pedals, the operator must be seated in driving position with
fastened safety belt and lowered safety bars; before any manoeuvre it is important to take all the precau-
tions indicated in "3.13 USING THE WORK EQUIPMENT".
q
When travelling on roads, always inhibit the equipment control (see "3.3.5 pos. 8 - EQUIPMENT CON-
TROL LOCKING LEVER (IF INSTALLED)").
q
Before leaving the operator seat, stop the engine only after lowering the equipment to the ground and
locking the controls (safety bars lifted in vertical position).
q
Non-compliance with these rules may lead to serious accidents.
CAUTION
q
The self-leveling system is operated automatically only when the loader arm is lifted with full bucket.
When the arm is being lowered, the self-leveling system doesn't start.
q
At the maximum height, the self-leveling system keeps the bucket partially folded to prevent the material
from being spread out.
The control pedals (1) and (2) are positioned on the footboard
under the operator seat and control the movements of the
loader arm and the bucket.
1
RKAB1460
2