Komatsu 37BF50111, Руководство по эксплуатации и техническому обслуживанию

Страница: 158 / 244

MAINTENANCE NOTES
156
4.2 MAINTENANCE NOTES
q
Use only Komatsu genuine spare parts.
q
Do not mix different types of oil.
q
Unless specified otherwise, the oils and the coolant used by Komatsu to fill the tanks before the delivery of the
machine are the following:
4.2.1 NOTES REGARDING THE ENGINE
4.2.1.1 ENGINE OIL
q
The engine oil must be selected very carefully, since it lubricates the engine, which is the machineís heart; the
main maintenance operations required for the engine oil are the following:
1 - daily check of the oil level;
2 - check of the oil pollution degree;
3 - periodical change.
4.2.1.2 COOLANT
q
The coolant serves to keep the engine at the correct temperature and therefore to ensure optimal operating con-
ditions; check the coolant level in the expansion tank daily and top up if necessary.
q
The coolant containing antifreeze is flammable; do not use naked flames near the coolant and do not smoke whi-
le topping up.
q
Use only permanent ethylene glycol-based antifreeze with the addition of anticorrosion and antifoam products.
The antifreeze-water ratio must be 50% (50% antifreeze and 50% water).
q
The use of permanent antifreeze requires only the routine change. It is not necessary to wash the cooling circuit.
q
Use drinkable water and in any case soft water.
q
Do not use corrosion inhibitors containing soluble oil, since they damage the rubber couplings.
q
The required standards for permanent antifreeze are the following: SAE-J1034 and FEDERAL STANDARD O-A-
548D.
In case of doubt regarding the compliance of the antifreeze used with the standards, contact your Komatsu Dea-
ler and ask for precise information.
ITEM SPECIFICATIONS
q
Engine oil
SAE 10W-30
API classification CD
q
Hydraulic system and hydrostatic transmission oil
SAE 10W
API classification CD
q
Biodegradable hydraulic system oil
(only for machines filled with synthetic biodegradable oil
type HEES not of plant origin)
SHELL NATURELLE HFX-32
q
Final transmission oil
SAE 10W-30
API classification CD
q
Fuel
Ambient temperature above -10ºC:
ASTM D975 no. 2 diesel oil
Ambient temperature below -10ºC:
ASTM D975 no. 1 diesel oil
q
Radiator
Permanent, ethylene glycol-based antifreeze, with corro-
sion inhibitor for protection up to -36ºC.