Kollmorgen AKMH, Инструкция по эксплуатации

Страница: 45 / 74

12.3.1 Tested properties with respect to cleaning agents (in process)
The testing lab of ECOLAB Deutschland GmbH tested the resistance of the Washdown
and Washdown Food surfaces to the following industrial cleaning agents:
— P3-topactive DES
— P3-topax 12
— P3-topax 56
— P3-topax 66
— P3-topax 990
In the process, the surfaces were immersed in the respective cleaning agent at 21°C tem-
perature for 28 days. This corresponds to approx. 2,500 cleaning cycles with 15-minute
contact each with the cleaning agent or 1,500 cleaning cycles with cleaning and subse-
quent disinfection.
The certificates are located in our Product WIKI on the Approvals page (in process).
Kollmorgen can only give a guarantee for the motor's lifecycle if the tested cleansing
agents are used. Any cleansing agent other than those mentioned above can be tested
by Kollmorgen upon request and, if appropriate, be approved.
12.3.2 Cleaning plan (in process)
Recommended cleaning plan (short form) with tested cleaning agents:
Flushing with water (40 °... 50 °C)
Flushing with low pressure. From top to bottom in the direction of the drain. Clean the
drain.
Foam cleaning
Foaming from top to bottom.
Alkaline:
P3-topax 66 (2-5%, 15 min daily)
Acid: P3-topax 56 (2%, if necessary 15 min)
Temperature: cold up to 40 °C
Disinfection
Spraying with wayer (40 °... 50 °C) with low pressure. From top to bottom.
Spray disinfection:
P3-topax 990 (1-2%, if necessary 30-60 min)
Foam disinfection: P3-topactiv DES (1-3%, if necessary 10-30 min)
Servomotors AKMH English - 45
Kollmorgen
08/2013
Technical Description
ENGLISH