Kolida CTS-632R10M, Руководство пользователя

Страница: 14 / 134

9
Assemble
Insert three anchor jaws into holes and line up the directing stub on the instrument with
the directing slot of the tribrach. Turn the locking knob 180 degrees clockwise and tighten the
locking screw by a screwdriver
2.7 Eyepiece Adjustment and Object Sighting
Method of Object Sighting (for reference)
1) Sight the telescope to the sky and rotate the eyepiece tube to make the reticle clear.
2) Collimate the target point with top of the triangle mark in the collimator.(keep a certain
distance between eye and the collimator).
3) Make the target image clear with the telescope focusing screw.
If there is parallax when your eye moves up and down or left and right this indicates the
diopter of the eyepiece lens or focus is not adjusted well and accuracy will be effected. You
should readjust the eyepiece tube carefully to eliminate the parallax.
2.8 Power On & Off
Power on
1) Be sure that the instrument is leveled.
2) Press and momentarily hold the power (POWER) key.
3) Rotate the EDM head in an upwards direction to initialize.
4) To turn OFF press and hold the power key until instrument powers down
Be sure about there is sufficient battery power when operating. If ‘Low Battery’ is shown
on the display, the battery should be recharged or replaced.
*** DO NOT remove the battery during measuring, otherwise the data will be lost and the
instrument would be harmed!!***