Kolida CTS-632R10M, Руководство пользователя

Страница: 10 / 134

5
2.3 Unpacking and Storage of the Instrument
Unpacking of the Instrument
Place the case lightly with the cover upward, unlock the case and take out the instrument.
Storage of the Instrument
Replace the cover on the telescope lens, place the instrument into the case with the
vertical clamp screw and circular vial upward (objective lens toward the tribrach), tighten the
vertical clamp screw, close and lock the case.
2.4 Instrument Set Up
Mount the instrument onto the tripod and secure firmly. Level and center the instrument
precisely to ensure the best performance. Use the tripod with a tripod screw.
Operation Reference: Leveling and Centering the Instrument
1). Setting up the tripod
First extend the extension legs to suitable length and tighten the screws, firmly plant the
tripod in the ground over the point of beginning.
2). Attaching the instrument to the tripod
Secure the instrument carefully on the tripod and slide the instrument by loosening the
tripod mounting screw. If the optical plumb site is positioned over the center of the point
tighten the mounting screw.
3). Roughly leveling the instrument by using the circular vial
Turn the leveling screw A and B to move the bubble in the circular vial, in which case the
bubble is located on a line perpendicular to a line running through the centers of the two
leveling screw being adjusted. Turn the leveling screw C to move the bubble to the center of
the circular vial. Recheck the position of the instrument over the point and adjust if needed.
4). Leveling by using the plate vial
Rotate the instrument horizontally by loosening the Horizontal Clamp Screw and place the