3
Window Kit Installation Instructions
Preparations for Installing the Window Kit
You must vent your portable air conditioner when running it in cooling or heating (PAC10013HBL
only) mode. Your unit includes a window exhaust kit that can be used to vent the unit out of a
window. Before you begin, make sure you have all the parts necessary for installation.
Window Kit Parts list:
1. Exhaust Hose (1 piece)
2. Hose Connector for Air Conditioner (1 piece)
3. Hose Connector for Window Panel (1 piece)
4. Window Plate Hole Cover (1 piece)
5. Window Plates - 5A (1 piece), 5B (2 pieces)
If you have multiple windows, choose one that is near an electrical outlet that will be able to
provide sufficient power to your unit. See the power requirements listed on the product label
printed on the side, or on the back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding window as shown in the
following images:
Follow the instructions on the next pages to install the window kit.
Note
: You may need to contact your electrician if your room’s circuit is not able to power your
unit.
