15
3. Detach the hood and carefully unhook the socks from the filter cage. Remove the sock and
turn the filter cage anticlockwise until triangular indents are aligned. Take the filter cage out
of the cleaner.
CAUTION!
Replace the damaged filter sock/filter cage immediately before the next
operation.
4. Rinse the filter sock with clean water.
5. Clean out the debris from the hood and rinse the filter cage with water. If brushing is
deemed necessary, use only a soft brush to clean the filter cage gently and carefully.
6. Reverse the previous steps to re-assemble the filter sock/ filter cage. Turn the filter
cage clockwise until its side tab is secured inside the notch of both sides as shown.
You will hear a “click” sound.
7. Align and re-assemble the hood to the pool vacuum and make sure the lever is
secured by pushing it down all the way to the hood.
