KOHTECT AVV-711, Руководство по эксплуатации

Страница: 103 / 115

AVV-711 Quick Book
103
16.1 MAIN SCREEN OF THE PROGRAM
Cautions in this screen Shortcuts in this screen
All required dimensions should be
properly entered(but you can edit them
later if need, measure data will not
affected)
Manual angle input should be always
used for the vertical shafts
To start new task
Tasks in this screen
To enter number of points(positions) to
measure
·
Create/modify/overview points
·
Setup parameters
·
Enter dimensions
·
Start measurement
·
View results(available when all
measurements taken)
·
Save file
·
Load saved file
To set or clear all distances equal
To enter current distance
To change parameters(use manual data
input or data from sensor, filter setup and
so on). NOTE: inclinometers should not be
used for the vertical shafts
To view result(available when all required
measurements taken)
To save to file, see Dealing with file dialogs
To load previously saved data from file, see
Dealing with file dialogs
To select point for set distance