Kohler VERSO50, Руководство пользователя

Страница: 49 / 170

VERSO 50_v1.0.27_EN 33502027401_3_1 page 17/24
2- 6 M5 - Alarms list
You will see a general screen for the setup of the alarms, composed by 4 pages. In the first page, select and confirm the parameter
“a” to choose the code of the alarm. In the upper part of the screen you will see the name of the correspondant alarm. Then modify
the parameters from “d” to “l” as you prefer. Return then to the first page and confirm the parameter “c” to save the modifications.
For every alarm, you can program all the following parameters:
POS. NAME DESCRIPTION RANGE
A Alarm code
Select this parameter to choose the alarm that you want to set. All the parameters in the
next pages refer to the alarm selected in this parameter. In the upper part of the screen
you will see also the name corresponding to the code that you are selecting.
-
B
Category of
the alarm
Not selectable parameter. -
C Save alarm
Parameter that has to be confirmed with the “i” button to save all the parameters from D to
L in the configuration of the alarm selected at parameter A.
-
D Activation
It permits to choose when the alarm condition must be verified and make the alarm
appear: Always (always enabled), Run (active only with engine running) or Disabled
(disabled). Always
Run
Disabled
E Delay Before the activation of the alarm, the cause must remain present for this time. 0-255 [s]
F Retentive
Choose if the alarm must be retentive (ON: the alarm indication remains on display until
you press the reset button, even if the cause has disappeared) or not (OFF: the alarm
indications disappears when the cause disappears).
ON
OFF
G Action
Select the action in consequence of the activation of the alarm: Warning (only indication),
Stop (the alarm stops the engine immediately) or Cooling (the alarms stops the engine
with cooling). Warning
Stop
Cooling
H Siren Function not available.
ON
OFF
I SMS Function not available.
ON
OFF
J Global 1 If On, the alarm activates the output set as Global alarm 1 (if present).
ON
OFF
K Global KG If On, if the alarm is active KG cannot be closed.
ON
OFF
L Global KR If On, if the alarm is active KR cannot be closed.
ON
OFF