Kohler PowerWAVE 8000DPA RI (S2) Series, Руководство пользователя, Страница: 34 / 88

2: General Description
26
TS_616_08 PW8000DPA ST (S2) User Manual 21/4/22
2.7.1 Display header bar
A navigation and status bar is displayed in the header area of every screen.
Figure 2.21 Navigation and status header bar
A Home Accesses the HOME screen.
B Mimic diagram Accesses the MIMIC diagram screen.
C
Warning The warning symbol is only visible in the presence of a monitored alarm or fault event.
Touching this icon will silence the audible alarm and open the EVENTS screen.
D Date Current date indication. Set in the user menu and used to date-stamp the alarms/events log.
E Time Current time indication. Set in the user menu and used to time-stamp the alarms/events log.
F
Module selection Accesses MODULE SELECTION screen from where it is possible to select a particular module and
exercise the navigation (status and measurements) at module level.
G
UPS number Each UPS module is given a sequential number in a parallel system. The number shown here is used to
identify a particular module –e g. P01 indicates the UPS number 01 . This can be used to identify the
module associated with the conditions displayed on the screen (e.g. identify a faulty module).
H
System status
OR
Load Status
System status : indicates that the user is in the system level navigation.
Load status: displays whether or not the load is protected, when the user is in the module navigation
level.
A B C D E F
G H