Kohler PowerWAVE 8000DPA RI (S2) Series, Руководство пользователя, Страница: 29 / 88

TS_616_08 PW8000DPA ST (S2) User Manual 21/4/22
21
2: General Description
2.6 Module control panel
Figure 2.16 LCD Control panel
2.6.1 Module mimic LED indicators
The module mimic LED colours change between
GREEN
,
RED
and
OFF
to
indicate the operational status of key UPS stages, and thereby serve to
show the active power path through the UPS.
• LINE 1 (rectifier) and LINE 2 (bypass) LEDs indicate the availability
of the input mains and bypass mains supplies respectively.
• INVERTER and BYPASS LEDs illuminate green to indicate which of
the two sources is providing the UPS output supply.
• BATTERY illuminates green when the battery is being charged and
flashes when the battery is discharging – e.g. when the inverter is
operating from battery power. The indication change to red if the
battery is faulty or fully discharged.
• Although it is not part of the module mimic, the ALARM LED, located
towards the lower-right of the control panel, provides a visual indication that an alarm condition has been detected.
When an alarm condition is present the LED is accompanied by an audible alarm.
Mimic LED indicators Alarm LED/Reset
LCD Power management display
Operator
Module ON/OFF
buttons (x2)
menu buttons
Figure 2.17 Module mimic diagram
LINE 2
LINE 1
BYPASS
INVERTER
BATTERY