28
1493953-W2-A
Always read the IMPORTANT SAFETY INFORMATION for your shower
Cleaning
De-scaling the Showerhead and inspecting the hose and diffuser
It is IMPORTANT to keep the Showerhead and Hose clean and free
from blockage to make sure your shower performs to its optimum. The
showerhead MUST be regularly cleaned and the hose MUST be regularly
inspected to ensure there is no internal collapse or blockage that could
reduce the flow.
Many household and commercial cleaners, including hand and surface cleaning
wipes contain abrasive and chemical substances that can damage plastics, plating
and printing and should not be used. These finishes should be cleaned with a mild
washing up detergent or soap solution, and then wiped dry using a soft cloth.
Cleaning the showerhead
Warning! Failure to keep the showerhead nozzles clear or inspect the hose
for blockage or internal/external collapse can restrict the flow rate from the
shower. This may cause damage to the shower or result in the temperature
delivered to the user rising to unsafe levels with a risk of scalding. You
MUST ALWAYS check the temperature before using the shower.
Use your thumb or a soft cloth to wipe any limescale
from the soft nozzles.
Unscrew the hose
from the showerhead
and the shower outlet.
Inspect the hose.
•
There are no user serviceable parts inside the shower. Only qualified, competent
personnel should remove the front cover, mains connections are exposed when
the cover is removed.
•
Switch the shower off at the isolator switch before performing any user maintenance
or before cleaning the shower.
In the event of a malfunction of the shower, a fault finding table is provided in this
guide detailing possible causes and remedies that may be carried out by non-
qualified personnel.
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY OR
PRODUCT DAMAGE:
User Maintenance
