15
1493953-W2-A
Adjustment for right hand entry electrical supply
1
2
3
4
5
6
Isolate the electrical and water
supplies.
Taking care not to damage the
wires, reposition the terminal
block to the location on the right
hand side of the case.
Refit and tighten the retaining
screw.
Note!
When the terminal
block is repositioned on the right
hand side, the retaining screw
must be fitted to the hole on the
left side of the terminal block.
Check the wiring and ensure that
it has not been damaged and will
not be trapped.
Retaining
Screw
Terminal block
default location
Terminal block
alternative
location.
(Note position of
retaining screw)
Unscrew the terminal block
retaining screw.
Carefully lift the terminal block
from its location on the left of the
case and remove the retaining
screw.
