6. Prepare the Site – 5" Drain
X
Drain Pipe
Finished Floor
Bath Model
K-1800
K-8331
K-8333
K-8332
K-8334
K-8335
K-8336
K-8337
1-7/8" (48 mm) Min
2-1/8" (54 mm) Max
"X" Dimension
5/8" (16 mm) Min
7/8" (22 mm) Max
1-1/8" (29 mm) Min
1-3/8" (35 mm) Max
1/2" (13 mm) Min
3/4" (19 mm) Max
5/8" (16 mm) Min
7/8" (22 mm) Max
5/8" (16 mm) Min
7/8" (22 mm) Max
1/2" (13 mm) Min
3/4" (19 mm) Max
1/2" (13 mm) Min
3/4" (19 mm) Max
NOTICE: Measure your product for site preparation. Note the model number on the packaging label, then visit the
product page at
for more information.
NOTICE: Provide adequate floor support.
Determine the location of the bath.
Position the bath so that the overflow side of the bath faces the preferred direction.
Verify that the subfloor is level and offers adequate support for the bath.
Verify that the finished floor is level before proceeding.
Insert the drain body into the bath.
Measure the distance "X" between the bottom of the drain body and the floor.
Cut the pipe to extend "X" height above the floor.
Cut the standard PVC or brass drain pipe to extend "X" height above the floor.
Kohler Co.
9
1420044-2-
A
