Kohler KDI 1903 TC Скачать руководство пользователя страница 34

Страница: 34 / 64

INFORMATION

ABOUT MAINTENANCE

INFORMATION ABOUT MAINTENANCE

5.1

Useful information about maintenance

•

This chapter shows all operations described in the

Tab. 5.1 and Tab. 5.2

. if you have the skills

appropriate may be directly carried out by the user.

•

Periodic inspection and maintenance operations must be carried out as indicated in this manual

and are the responsability of the user.

•

Failure to comply with these service and maintenance intervals increases the risk of technical

damage to the engine. Any non compliance makes the warranty become null and void.

•

In order to prevent personal and property damage read carefully the instructions listed below before

proceeding with any operation of the engine.

Warning

•

Inspections must be made when the engine is off and cold.

•

Place engine on level sur face to ensure accurate measurement of oil level.

•

Before starting, to avoid spillages of oil make sure that: - the oil dipstick is inserted correctly;

- also check that: oil drain plug and oil filler cap are tightened firmly.

Important

•

Before proceeding with operation, read

Par. 3.2.2

Danger

•

For safety precautions see

Chap. 3

Содержание KDI 1903 TC

































































Результаты поиска

Содержание KDI 1903 TC

Отзывы:

Похожие инструкции для KDI 1903 TC

Бренды по названию

Популярные бренды

Kohler KDI 1903 TC, Руководство пользователя

Результаты поиска

Содержание KDI 1903 TC

Отзывы:

Похожие инструкции для KDI 1903 TC

Бренды по названию

Популярные бренды