Kohler KD27V12 Скачать руководство пользователя страница 84

Страница: 84 / 112

Operating fluids and maintenance

Operation and Maintenance Manual

Maintenance activities

Mount belt (fan)

. (For the procedure, please refer to the chapter “Check state

of fan drive belt drive, replace if necessary”.)

Mount fan on the fan drive

. See the generator set’s operating manual.

5.14.9 Checking and replacing the water pump belt drive and

battery charging alternator

Damage to the V-ribbed belt includes:
– Broken ribs
– Rubber nodules in the base of the belt
– Dirt and/or stone deposits
– Ribs broken off the base of the belt
– Transverse cracks on the back
– Transverse cracks in several ribs

Fig. 66: Damage to the V-ribbed belt

The belt attachment is self-tensioning and maintenance-free.

Replacing the V-ribbed belt

Make sure that:

A new V-ribbed belt is on hand.

Another person is present.

Turning device ID no. 10123791 is available.

WARNING

Rotating parts!
Risk of injury! Causes serious injuries.

Turn the Diesel engine off.

Secure the engine against unexpected starting.

KD27V12 33521029401_3_1 en 2017-07-01

Содержание KD27V12













































































































Результаты поиска

Содержание KD27V12

Отзывы:

Похожие инструкции для KD27V12

Бренды по названию

Популярные бренды

Kohler KD27V12, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание KD27V12

Отзывы:

Похожие инструкции для KD27V12

Бренды по названию

Популярные бренды