Kohler K-T9493, Руководство по установке, Страница: 7 / 32

2. Install the Trim
Installing Mixing Valve Trim (K-400 and K-401 Models)
Remove and discard the plaster guard if it is still in place.
Thread the collar(s) to the valve and hand tighten.
Verify that each trim seal is correctly installed in an escutcheon
hole. The seal(s) should be installed so the flat side faces outward
and the tapered side faces inward.
Remove the backing from the adhesive gasket material. Starting
at the escutcheon drain opening, carefully apply the gasket
material around the back edge surface of the escutcheon.
Once applied, carefully trim away any excess gasket material so
the escutcheon drain opening is not blocked.
Carefully slip the escutcheon over the collar(s) and against the
finished wall. Position the escutcheon so the
″
Kohler
″
logo is at
the top.
Secure the escutcheon to the valve with two screws.
Collar
Screw
Screw
Collar
Collar
Drain
Opening
K-T9494
Escutcheon
Trim
Seal
Adhesive
Gasket
Finished
Wall
Adhesive
Gasket
Volume Control
Valve
K-T9493
Escutcheon
Mixing
Valve
Screw
O-Ring
Cap
Cap
Detent
Detent
O-Ring
Screw
"Off"
"High"
Round Handle
Volume
Control Knob
Lever Handle
Volume Control
Knob
Rotate
counterclockwise.
Grip
Ring
Kohler Co. 7 1012606-2-B