User Keypad and Whirlpool Modes/Features
Power -
Turns the whirlpool pump on and off. Symbols illuminated in blue indicate available
modes/features. Modes which are operating will be illuminated in green.
Outer Ring -
Rotate the outer ring to the desired mode. The selected mode will flash (blue).
Activate Button -
Press
″
OK
″
to activate the desired mode.
Up Arrow -
Increases the water flow when the Flexjet mode is active. Increases the pulse speed
when the neckjet or backjet mode is active.
Down Arrow -
Decreases the water flow when the Flexjet mode is active. Decreases the pulse speed
when the neckjet or backjet mode is active.
Flexjet Mode -
When illuminated, this mode allows you to adjust the water flow by pressing the up
or down arrows.
Neckjet Mode -
When illuminated, the neckjets are operating and you may adjust the pulsing speed
by pressing the up or down arrows.
Backjet Mode -
When illuminated, the backjets are operating and you may adjust the pulsing speed
by pressing the up or down arrows.
Heater -
The heater automatically engages when the whirlpool is turned on. To turn the heater off,
rotate the outer ring until the heater mode is flashing and press
″
OK.
″
Press
″
OK
″
again to turn the
heater back on. The heater will help to maintain the water temperature up to 104°F (40°C).
Indicator Bar -
Shows the water flow volume in the Flexjet mode. Shows the pulse speed in the
neckjet or backjet mode.
Effervescence Mode -
Effervescence ports activate to provide a gentle, soothing bubbling action. The
Flexjet mode, backjets and neckjets will automatically turn off when the effervescence mode is
activated.
Chromatherapy Cycle -
Chromatherapy lights will automatically and continuously cycle through
the eight colors: white, violet, indigo blue, aqua blue, green, yellow, orange, and red. One cycle
through all eight colors takes approximately one minute.
Chromatherapy Specific Color Selection -
When this mode is selected, you may choose a specific
color for the bath.
Flexjet Flow Mode
Activates Mode Selected
Backjet Mode -
Adjust Pulse
Rotate outer
ring to access
desired mode
Power On/Off
Chromatherapy -
Specific Color
Heater
Chromatherapy Cycle
Decreases Flow
Effervescence Mode
Indicator Bar - Shows
water flow volume or
pulse speed
Increases Flow or Pulse
Neckjet Mode - Adjust Pulse
Lighted User Keypad
NOTE: Keypad shows all
features available. Your
keypad may vary based
on your whirlpool model.
1023274-5-B
4
Kohler Co.
