1
7. Installation Checkout
Wrap the toilet seat with plastic wrap to prevent water from spraying
from the toilet during testing.
Toilet makes one short be
ep onc
e it is plugged in. The nozzle
stretches out and draws back once. Backlight on the side keyboard
lights up and the night light flashes. All the actions last until the
initialization process completes.
Attach the clips evenly along the hose and power cord.
The seat is activated by skin-to-seat contact. Unless otherwise
stated, the seat must be occupied to activate the functions. To
activate the seat controls for testing purposes, when facing the toilet,
place your hand or a damp wash cloth on the right side of the seat
approximately 1/3 from the front of the seat (sensor area).
Proceed to the “Operation” section of the Homeowners Guide to test
the various seat functions.
1194357-T01-B
8
Kohler Co.