6. Connect the Water Supply
Connect the T-valve directly to the toilet fill valve.
NOTE!
For those newly installe
d plumbing pipes, (before the inlet hose is
connected to the T-valve,) must flush for several seconds to clean the inner
side of the pipe in order to remove the dirt and debris, etc.
Connect the T-valve to the toilet seat with the supplied hose.
NOTE
：
Please do not reuse the old hose.
Connect the water supply to the T-valve.
Turn on the water supply.
NOTE
：
Flush the water supply pipes thoroughly to rem
ove debris. The
product is designed for tap water. Make sure not to use industrial water/grey
water/black water/sea water for the water supply.
Check all connections for leaks and make any adjustments as
needed.
IMPORTANT! Risk of product damage.
Take care to face right in position to
the inlet pipe thread and seat thread. Take care not to crossthread or overtighten
connections. Hand tighten plus one-quarter turn is sufficient for tightening.
IMPORTANT! Risk of product damage.
Use care not to scratch the product
surfaces.
T-Valve
Inlet Hose
Supply Stop
Hose
Kohler Co.
7
1194357-T01-B