-6-
Install The Toilet
1. Install the waste outlet and water inlet as shown.
1.
Fig.#2
2
UNIT
mm
Water
Supply
345
Outlet
155
S.trap
345
Outlet
185
Water
Supply
P.trap
Fig.#3
3
2. Put the bowl in position, and using a pencil, mark the
position of the bowl on the floor, as shown. Mark the
positions for the tank attachment bolts on the wall.
Make sure that you avoid hidden cables and
pipes when drilling holes in the floor or wall.
Caution!
2
1
2.
4
3
3.
15
38
3. Remove the bowl and place the installation template on
the floor. Drill the anchor bolt hole (depth
38mm) in the
floor with an 15mm dia. drill, then remove the template.
It is suggested to reverse the bowl before drilling with the
template. Compare the actual loacation of installation hole
with the template to map more accurate installation
location, as shown in the following figure.
Fig.#4
4
1332802-T01-E
