9. Adjust the offset nut until the vanity
top is level.
10. Use a level to ensure the the vanity
top is level. Fit the washers and the
nuts to the attachment bolts to
secure in place. Tighten the nuts.
11. Remove any excess silicone
sealant.
12.Place the overflow cover over the
overflow hole in the vanity top
making sure it is orientated correctly.
Install the Plumbing
1. Install the drain in accordance with
the manufacture s instructions.
Make sure a
watertight seal exisits on all
washbasin drain connections.
Provide access to the
plumbing connections for future
plumbing maintenance.
2. Connect the hot and cold water
supplies.
3. Open the hot and cold water valves
and check the supply connections
for any leaks.
4. Run water into the washbasin or
vanity top, and check the drain
connections for any leaks.
,
Caution!
Caution!
-7-
9.
10.
11.
12.
1.
2.
3.
4.
Washer
Nut
Offset Nut
HOT
COLD
P4132130
P4132100
P3978070
1037583-T01-A