2. Supply Connections
For models with
two hoses,
connect the left supply hose to the
hot water supply stop and the right supply hose to the cold water
supply stop.
For models with
one hose,
connect the supply hose to the supply
stop.
Tighten the connections with a small adjustable wrench.
3. Install the Power Supply
NOTE:
Avoid the area in front of the sensor for 2 minutes after
connections are complete. Sensor will not function correctly if it is
triggered in the first 2 minutes. Disconnect and reconnect the power
to reset the sensor.
Mount the HEC under the counter using two screws (not
supplied).
Connect the HEC to the faucet wire.
Avoid the area in front of the sensor for 2 minutes.
Supply
Hose
Supply
Stop
Hybrid
Energy
Cell
Deck
Faucet Wire
1124217-2-C
4
Kohler Co.
