Before You Begin
CAUTION: Risk of property damage.
To support the bedpan
washer and piping, provide sufficient reinforcement or mounting
brackets as required inside the wall.
NOTE:
Refer to the roughing-in diagram for dimensional
information.
Shut off the main valve and water supply.
Observe all local plumbing codes and building codes.
Plumb using 1/2
″
NPT pipe, or 3/8
″
NPT pipe, or 1/2
″
copper
tubing, elbows, and adapters. Secure the piping to reinforcements
in the wall.
Provide pipe holes in the finished wall according to the
roughing-in diagram.
Kohler Co. reserves the right to make revisions in the design of
bedpan washers without notice, as specified in the Price Book.
3/8" Cold
1/2" N.P.T. Discharge
to Spray
1/2" N.P.T. Supply to
Vacuum Breaker
1/2" N.P.T.
Supply to
Hose &
Spray
3/8"
N.P.T.
Pedal in Raised
Position for
Floor Cleaning
3 Mounting Holes
for 1/4" (6 mm)
Screws (Provide
Backing)
Finished
Floor
14"
(35.6 cm)
2-7/8"
(7.3 cm)
5"
(12.7cm)
2-3/16"
(5.6 cm)
1/2"
(1.3 cm)
7-3/4"
(19.7 cm)
2-3/4"
(7 cm)
1-3/8" (3.5 cm)
2-1/4"
(5.7 cm)
14" (35.6 cm)
7-5/8"
(19.4 cm)
3/4"
(2 cm)
44" (111.8 cm) to
Floor Optional
13-1/2"
(34.3cm)
3-7/8"
(9.8 cm)
12-1/2"
(31.8 cm)
3/8" N.P.T
Inlet
5/16" (8 mm)
3" (7.6 cm)
1-1/4"
(3.2 cm)
Kohler Co.
3
1034416-2-A