6
1012829-2-
B
NOTE: The following step is applicable to a tile covered
rough deck installation only.
Slide the washer, flat side facing forward, on the supply
tube.
NOTE: The washer is not needed for rim/finish deck
installation.
Fig. #14
Spout
Supply
Tube
Rough
Deck
Finished
Deck
Washer
Back off the setscrews in the sleeve, and with a twisting
motion install the sleeve on the spout supply tube until it
contacts the washer surface.
Align the sleeve so the setscrews are not facing directly
forward or backward.
Tighten the setscrews.
Fig. #15
Setscrew
Setscrew
Sleeve
Install the spout assembly onto the sleeve, and carefully
press down until the spout base contacts the finished
deck surface.
Align the spout as desired, and tighten the setscrew.
If included, press the plug button into the setscrew hole.
Fig. #16
Setscrew
Spout
Assembly
Sleeve
Finished
Deck
Plug Button