1242390-2A-C
4
1242390-2A-C
5
INSTALLATION CHECKOUT
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
⑤
⑥
Put the washer(33) into the nut of the
hose(32). Connect the connection hose
to the diverter kit(15).
Put the washer(34) and washer(37) into
the nuts of the hose(35). Connect the
diverter kit and the connector(36) of
valve kit by the hose(35).
How to Install the Handshower
Remove the nut(27), washer(26) and
washer(25) in turn from the shank(24).
Put the washer(28) into the groove of
the escutcheon(29). Screw the
escutcheon onto the shank. Insert the
shank into the mounting hole.
From underside, install the washer(25),
washer(26) and nut(27) to the shank.
Then tighten the nut firmly.
Connect the end A of the hose(30) to
handshower(31). Slide another end of
the hose(30) through the escutcheon,
and attach to the connection hose(32).
If needed, install the accessories of the
handshower as instruction.
Ensure that all connections are tight.
Ensure that the handle is in the off
position.
Open the drain. Turn on the main
supply and check for leaks. Repair as
needed.
Remove the aerator(38) by key(39),
Remove handshower(31). Open valve
and run water through the spout to
remove any debris. Switch to
handshower to remove any debris.
Turn the valve off. Reinstall the aerator
and handshower.
39
38
31
29
24
28
A
31
30
25
26
27
32
15
33
32
35
36
34
37
30