1242390-2A-C
2
INSTALLATION
②
①
How to Install the Valve Kit
Remove the nut(3), washer(2) and
washer(1) from the valve kit.
Note:
Don’t separate the escutcheon(6)
from the valve. Put the washer(5) into
the bottom groove of escutcheon. Put
the washer(1) into the groove of
washer(2).
Fit the valve kit to the hole of the bath
tub. From underside of the bath tub,
install the washer(1), washer(2) and
nut(3). Position the valve kit so that
the handle towards front. Tighten the
screws(4) to secure the valve kit.
Attach the hoses(7) to water supplies.
The hose with “COLD” mark connects
to cold water.
How to Install the Spout
Loosen the screws(9) with the hex
wrench(8), and remove the
connector(10).
Remove the plug(11) from the spout
kit(14). Loosen the screw(13) with the
hex wrench(12), and remove the
diverter kit(15) and escutcheon(16).
From underside of the bath tub, insert
the diverter kit into the hole of bath tub
and put out it as much as possible.
14
8
13
12
11
10
9
16
15
6
5
1
2
3
4
7