1210152-**
Showerhead
(only for 72425IN)
1211890-**
Showerhead
(only for 72419IN)
1261228-**
Shower Arm.
1233044-**
Escutcheon
831727-**
Hose assembly
1226888-**
Hand shower
(only for 72415IN)
1226887-**
Hand shower
(only for 72421IN)
72419IN & 72425IN SHOWERHEAD WITH ARM & ESCUTCHEON
1220546-IN2 Rev-C
SERVICE PARTS
72415IN & 72421IN HAND SHOWER WITH METAL HOSE
SHOWER HEAD -
1. Remove the temporary nipple.
2. Slide the escutcheon over the shower arm(2).
3. Apply tape or sealant to the shower arm, and
install the shower arm into the shower elbow(1).
4. Tight with astrap wrench. Push the escutcheon
against the wall.
5. Flush both water supplies through the shower
arm for one minute before the showerhead is installed.
6. Apply tape or sealant to the exposed end of the
shower arm. Tighten the showerhead(3) with a strap wrench.
OPERATION:
For multi mode showerheads & hand shower adjust the lever or
rotate the sprayface to change the spray options.
1
3
2
INSTALLATION
HAND SHOWER -
1. Filter washers(1) provided with shower
hose(2) must be installed ineach end of hose(2).
2. Connect shower hose to handspray(3) and
the water supply.
2
3
MAINTENANCE:
To dislodge debris, rub the nozzles while the water is running.
disconnect the shower head or
handshower and clean the screen washer.
2
3
**Color code must be specified when ordering
1220546-IN2 Rev-C