1034576-9-B
1
© 2005 Kohler Co.
NOTE:
The faucet illustrated may look different than your actual
product. These instructions apply to all products that use this kit.
Remove the housing setscrew from the back of the faucet
housing using a 2.5 mm hex wrench.
Use a 2.5 mm hex wrench to remove the handle screw.
Remove the handle.
Remove the Old Handle
CAUTION: Risk of personal injury.
Scalding may result if the
limit stop is not reinstalled properly.
NOTE:
The water temperature does not need to be adjusted if the
water temperature is below 105
∞
F (41
∞
C).
NOTE:
Use a thermometer rated for 120
∞
F (49
∞
C) or greater.
NOTE:
When using a tempered water supply, install the
vandal-resistant plug button.
Optional Temperature Limiting Adjustment
SERVICE KIT INSTRUCTIONS
Handle Kit
1031338
1047233
Handle
Limit
Stop
Handle
Screw
Housing
Setscrew