Kogan KASMSVDC13A, Быстрый старт, Страница: 22 / 23

22
Specifications
Power rate ~220-240V, 50/60Hz, 1200W
Insulation level Class I
Temperature 20-90
℃
Temperature accurate ±0.1
℃
Timer Maximum 99 hours 59 minutes.
Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.
Troubleshooting
Noise
Under normal operation the system will hum due to the motor, impeller and cooling fan in operation.
Grinding Noise
The stainless steel skirt is loose. Push the stainless skirt up into guide groove and turn to the right
until the hole aligns the nut insert inside the body. With the skirt secure, the noise will go away.
There might be the chance of the stirring shaft was inadvertently bent. If this is the case, unscrew
the bottom pump disc and gently push the impeller until it is centred.
Slurping Noise
Your pump has formed a water vortex like when you are emptying out a bathroom sink or tub. Add
more water or gently disturb with a spoon. There is no sure way to eliminate a vortex forming due to
the pump rotation but usually will go away on its own.
GuWhoosh Noise
The pump is sucking air - add more water. You should also see small bubbles in your tank.
Food Damage