Kogan KAMSBSF527B, Руководство пользователя, Страница: 7 / 20

•
Remove all packaging material before using the new refrigerator. This includes the
foam base and all adhesive tape holding the refrigerator accessories inside and
outside.
• Clean both the inside and outside of the refrigerator with wet cloth. A small
amount of neutral detergent can be added to warm water to wash the cloth, and
continue wiping the appliance with clean water.
• Locate an independent power outlet with grounding contact for the refrigerator
which does not share a multi-purpose socket with other electrical appliances.
•
Do not connect a grounding wire. The grounding pole of the power plug will
provide adequate and reliable grounding.
Transportation
•
Do not invert, apply pressure to the sides of, or excessively vibrate the unit. When
moving, the tilt angle cannot exceed 45 degrees.
• Do not attempt to move the unit by the door.
Location
•
Ensure proper air circulation around the refrigerator. Do not place the unit near
heat sources, direct sunlight, moisture or water. Avoid rust and weakening the
insulation.
•
Ensure that the refrigerator has least 30cm clearance above, and at least 10cm on
the sides and back. This ensures the refrigerator door can open or close
conveniently and avoids heat build-up.
•
Install the refrigerator on solid, level flooring.
BEFORE USE
Note:
•
Do not allow the refrigerator any or other heavy object to be placed on the power
cable, as damaging the cable may present an electrical hazard.
• Before connecting the appliance to power, check the voltage range of
refrigerator and power supply carefully.