K30160, K30165, K30166 Rust Preventing Characteristics Oil Bath
Operation and Instruction Manual
K30160,5,6-Manual
-15-
8 Replacement Parts
Part Number
Replacement Part
K299-0-16
Bearing Housing (#1)
289-001-012
Ball Bearing (#2)
K301A-0-6
Crossbar (#3)
326-102-004
½ ID Steel CAD/PL Collar (#4)
K301-0-5
Stirrer Collar (#5)
K301-0-7
Stirrer Housing Assembly (#7)
K301-0-16A
Idler Pulley Assembly (#16A)
K301-0-8L
L.H. Upper Stirrer Assembly
K301-0-8R
R.H. Upper Stirrer Assembly
K301-0-9
Lower Stirrer Shaft
K301-0-10
Stirrer Pulley, 50/60 Hz
K301-0-11
Stirrer Rod
288-115-056
Motor, 115V 60 Hz
288-230-001
Motor, 230V 50 Hz
288-230-003
Motor, 230V 60 Hz
K301-0-11A
Motor Pulley, 50 Hz
K301-0-12
Motor Pulley, 60 Hz
K301A-0-5
Heater, 1500W 115V
K301A-1-0-5
Heater, 1500W 230V
265-600-001
RTD Temperature Probe
275-103-044
Temperature Controller, RS485
301-005-001
Endless Woven Polyester Belt
*(#--) numbers refer to parts indicated on
assembly drawings
9 Service
Under normal operating conditions and with
routine
maintenance,
the
Rust
Preventing
Characteristics Bath should not require service.
Any service problem can be quickly resolved by
contacting Koehler’s technical service department
either by letter, phone, fax, or email. In order to
assure the fastest possible service, please provide
us with the following information.
Model Number:
Serial Number:
Date of Shipment:
10 Storage
This laboratory test instrument is equipped with
electrical components. Storage facilities should be
consistent with an indoor laboratory environment.
This testing equipment should not be subjected to
extremes of temperature and/or moisture.
This equipment was shipped from the factory in
a corrugated cardboard container. If long term
storage is anticipated, re-packing the instrument in
a water-resistant container is recommended to
ensure equipment safety and longevity.
11 Warranty
We, at Koehler, would like to thank you for your
equipment purchase, which is protected by the
following warranty. If within one (1) year from the
date of receipt, but no longer than fifteen (15)
months from the date of shipment, Koehler
equipment fails to perform properly because of
defects in materials or workmanship, Koehler
Instrument Company, Inc. will repair or, at its sole
discretion, replace the equipment without charge
F.O.B. its plant, provided the equipment has been
properly installed, operated, and maintained.
Koehler Instrument Company must be advised in
writing of the malfunction and authorize the return
of the product to the factory. The sole
responsibility of Koehler Instrument Company and
the purchaser’s exclusive remedy for any claim
arising out of the purchase of any product is the
repair or replacement of the product. In no event
shall the cost of the purchaser’s remedy exceed
the purchase price, nor shall Koehler Instrument
Company be liable for any special, indirect,
incidental, consequential, or exemplary damages.
KOEHLER
INSTRUMENT
COMPANY,
INC.
DISCLAIMS
ALL
OTHER
WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE. Please save the
shipping carton in the event the equipment needs
to be returned to the factory for warranty repair. If
the carton is discarded, it will be the purchaser’s
responsibility to provide an appropriate shipping
carton.
Содержание K30160
Страница 2: ......
