Koden MDC-5004, Инструкции по эксплуатации

Страница: 80 / 192

Chapter 2 Radar Basic Operation MDC-5000 Series
0093153004-00 2-42
2.29 Cursor data
Cursor data is displayed in distance and bearing at lower right of the display. In addition, it can also be
displayed in latitude and longitude position.
CURSOR setting menu
1
Press MENU key to display
“Menu”.
2
Select [NAV TOOL] => [CURSOR] =>
CURSOR SHAPE: Set up shape of cursor.
CURSOR:
NOT OPERATION: ON/OFF of the cursor indication.
ON: The cursor shape and data are always indicated on the display.
OFF: The cursor shape and date will be disappeared after 30 sec.
from last cursor operation.
POSN DISP: ON/OFF of the latitude and longitude position display.
CURSOR HUP MOVE: When HUP mode is used, OFF always remains at the fixed position.
ON links a bearing changes and moves.
INFO: ON/OFF of the TT, AIS and MAP information data display selected by cursor and ENT key.
ON: TT, AIS and MAP information data will be displayed near cursor during about 15 sec.
after these data is selected.
Bearing
Distance
Latitude
Longitude
ENT key
TT - xx
312.5
o
8.3kn
etc.