Koden MDC-2000 series, Руководство по эксплуатации

Страница: 70 / 82

MDC-2000 Series Chapter 5 Equipment
0093120005-02 5-17
Connection with the AIS Receiver (J2) (Prepared by a user)
Use the CW-387-5M (Optional) when installing the AIS receiver. For connecting any equipment, one
end of the CW-387-5M is left un-treated. Prepare a connector suitable for the equipment you desire to
connect.
The connection cable (CW-387M-5M) consists of eight core wires and the shield wire around them. A
signal is inputted from the orange/red (AISIN+) and orange/black (AISIN-) wires.
For connection of the CW-387M-5M and AIS receiver, refer to the illustration below.
When cables are connected, please perform the waterproof and insulation treatment on the junction
with self-bonding tape or similar materials.
Structure of CW-387-5M
AISIN+ (Orange )
AISIN- (Black)
To AIS receiver
Insulate other wires (including the shield wire)
Connection with the navigation equipment (J4, J5)
Two NMEA0183/IEC61162 input/output ports are provided. Connect the navigation equipment and the
external equipment such as KODEN made GPS sensor to them. The optional cable with connectors at
both ends is available. The CW-376-5M of which one end is left untreated is also available. Prepare a
cable suitable for the equipment you desire to connect.
The connection cable CW-376-5M consists of six core wires and the shield wire around them. A signal
is outputted from the white (NMEA TX+) and red (NMEA TX-) wires, and a signal is inputted from the
orange (NMEA RX+) and black (NMEA RX-) wires.
For wiring of CW-376-5M, refer to the illustration below.
When cables are connected, please perform the waterproof and insulation treatment on the junction
with self-bonding tape or similar materials.
Structure of CW-376-5M
GND(Blue)
NMEA TX+(White)
To navigation equipment
NMEA TX-(Red)
NMEA RX+(Orange)
NMEA RX-(Black)
+12V OUTPUT
(Green)
* In only J3, +12V is outputted
Caution: Insulate the un-used lead wires by winding them with an insulation tape not to
contact each other.
Connection of CCD Camera (J6) (Prepared by a user)
The optional product CW-405-0.3M is equipped with a RCA jack for connection to the CCD camera
2 AISIN+ orange/red
3 AISIN- orange/black
GND(Blue)