Koden KSD-1100, Руководство по эксплуатации, Страница: 38 / 98

Chapter 2 Operation and Setting KSD-1100/1210
0093107081-00 2-10
or off the corresponding output sentence, including, AIS, APB, BOD, BWC, DPT, GGA, GLL, GSA,
RMC, VTG, XTE, ZDA, etc.
(E) Click [Pause] in Signal check out to pause the input sentence screen to view the output sentence.
Click [Reset] to refresh the sentence and re-enter.
[3] Baud rate
Click [Baud Rate] to set the baud rate of NMEA_0183 serial port: 4800/9600/19200/38400.
[4] NMEA 0183_3 Configuration
You can be configured as input or output. When Output is selected, only AIS output is available.
[5] Tx Power Setting
Select [Silent] to stop transmitting AIS own ship information. Select [2W] to transmit AIS own ship
information. The setting is "2W" when the power is turned on.
2.2.10.3 Speed and course Filtering
[1] SOG Filtering: Speed can be set on / off smoothly.
[2] SOG Filtering Setting: The setting range is 2.0 to 59.0, and the smooth value can be set according
to the time operation needs. The speed change has a mitigation process. The larger the value, the
slower the change.
[3] SOG Burr: Setting range 0.5 to 10.0.
[4] COG Filtering: Setting heading smooth on / off.
[5] COG Filtering Setting: Setting range 2.0 to 59.0.
[6] COG Burr: Setting range 59 to 360.
2.2.11 Unit setup
[1] Distance Unit: NM, Km can be set.
[2] Speed Unit: Kn, Km/h can be set.
[3] Depth Unit: m, fm, ft can be set.
[4] Temperature Unit: °C, °F can be set.
2.2.12 Azimuth and magnetic declination
[1] BRG: True north, Magnetic north can be set.
[2] Magnetic Declination: Manual setting range 0.0 to 179.9° W (E).
2.2.13 Screen Sharing
First connect the monitor to output the projection screen display through HDMI and adjust the display
position of the monitor to obtain the best display effect.
[1] HDMI mode: including AUTO, 1920 x 1080P, 1280 x 720P, 720 x 576P, etc. for setting.
[2] HDMI screen Scale: you can manually adjust the display position of the top, bottom, left, and right of
the monitor.