Koden CVS-FX2, Руководство по установке, Страница: 74 / 78

Chapter 3 Maintenance CVS-FX2/FX2BB
3-4
0092602002-12
the indication will be in red.
(7) [VOLT2] displays voltage of power input
line. When this voltage falls in abnormal
range, alarm will sound and an alarm
message will be displayed.
When the voltage falls in abnormal
range, the indication will be in red.
(8) [TEMP] displays water temperature of
the water temperature sensor.
In the case of non connection, - 30.0 in
red will be displayed.
(9) [SPEED] displays the speed of the
boat’s speed sensor.
In the case of abnormality, display will
be in red.
(10) [Version] displays the version No. of
the system software.
(11) [IPL] displays the version No. of IPL
version.
(12) [Top.ncd] will display the version No.
of FPGA data.
(13) [MAC ADDRESS] displays MAC
address used in network.
(14) [Keyboard] will display the version No.
of the Operation unit.
3.4.3 LCD Test
Display the setup box for [System Check] in
the same way as for [Panel Test], and select
[LCD Test].When [ ] is pressed, the grid will
be displayed.
Each time [ ] key is pressed, the color of
display will change, and displays finally the
setup box of [System Check].
3.4.4 Initialize
This is to return all setup of each CM or the
whole system to the factory default settings.
However, waypoint data and image stored
data will remain as they are.
1. Press .
2. Select [Maintain]
– [Initialize]
3. Press [ ] of .
The setup box of [Initialize] will be
displayed.
4. When an specified CM is to be initialized,
select [CM1] to [CM6] with [▲] and [▼]
keys. To initialize the whole system, select
[System ALL].
When one of [CM1] to [CM6] is selected,
the set values commonly used at each CM
such as selected language and units will
not be initialized.
When [System ALL] is selected, all setup
values including the values commonly
used at each CM will be initialized.
5. Press [ ].
The setup box of [CM initialize] will be
displayed.
6. When initialization is performed, select
[Yes] for initialization by pressing [
▲] and
[▼] keys, and [No] for not to initialize.
7. Press .
At [Yes], initialization will be performed.
At [No], the menu will be closed.
3.4.5 Update of program
This is used for program update.
(Please consult your sales agent)
1. Press .
2. Select [Maintain]
– [System Program
Load].
Caution: When [System All] is
selected, the display will be in
English after initialization.