Koden CVS-875D, Руководство по установке

Страница: 34 / 122

Chapter 1 Installation CVS-875D/877D
1-12 0092607072-01
1.5.3 In the case of inner hull installation
1.5.3.1 TDM-052A/TDM-062A/TDM-083
1) In the case of steel boat
With reference to the figures below, install the transducer at a shipyard.
Mounting components of a transducer on steel boat
No. Name Material Qty Remarks
1 Transducer unit (with bottom plate) 1
2 Cable gland (CG-1) SS400 1
3 Tank SS400 1
By shipyard
4 Mounting bolts SUS304 4
Anticorrosive zinc (suggestion)
Plumbing pipe
This pipe should be extended
up to draft line or junction box.
Cable gland
Tank for TDM-052A/TDM-062A/
TDM-083.
(Common to FRP, wood and steel boat)
Material:SS400 t6.0 By shipyard
Weld plate or rod to
protect knocking the
net or ropes
You can remove the TD
by removing this bolt.
2
FRP, wood and steel boat protruding mounting kit.
(For TDM-052A/TDM-062A/TDM-083)
Material: SS400 t6.0 By shipyard
1
3
4
Unit: mm