Koden CVS-875D, Руководство по установке

Страница: 33 / 122

CVS-875D/877D Chapter 1 Installation
0092607072-01 1-11
1.5.2 Precautions regarding transducer installation
Cut a PF1 1/2 pipe parallel screw (P = 2.3091) in the 1 1/2 inch pipe, screw in the transducer,
and fix it with the lock bolt.
Attach the pipe receiving bracket and tightening bracket to the ship's side so that this bolt can
be moved up and down and removed.
Raise the pipe above sea level to avoid water pressure during the voyage. When using it,
lower it as deeply as possible so that it is not affected by air bubbles.
During use, fix the front and back of transducer with a rope so as not to turn by water
pressure.
Fig.1.11 TD ship side installation diagram
Cable protective cap
Pipe fixing bracket
Pipe tightening bracket
Pipe SGP-1 1/2
Pipe receiving bracket
Rope
TD
BOW