Koden CVS-875D, Руководство по установке

Страница: 27 / 122

CVS-875D/877D Chapter 1 Installation
0092607072-01 1-5
1.2.2 Flush-mount installation
(1) Make a square hole at the location to be installed (See Fig. 1.5)
(2) Remove four plastic corner guard caps of the Display unit (These can be easily pulled out
upwards).
(3) Confirm that the unit matches the square hole. If not matches, correct the square hole.
(4) Connect the connectors for power and transducer to the unit respectively.
(5) Install the Display unit in the installing location (square hole) and fix it with four tapping
screws (4mm) (M4 or pan-head). (Prepare 4 mm screws suitable for thickness of
installing location.)
(6) Install the corner guard caps removed in step (2).
Fig. 1.4 Flush-mount installation
Fig. 1.5 Hole for flush-mount installation of Display unit
Corner guard cap (4 pcs)
Threading hole
M4 screw (4 pcs)
Display unit
Unit
：
mm (inch)
368
(14 31/64)
368
(14 31/64)
4-4mm Screw hole
348
(13 45/64
)
Treading hole
337
(13 17/64)
334
(13 5/32
)
303
(1
1 59/64
)
15.5
(39/64)
15.5
(39/64)
15.5
(39/64)
15.5
(39/64)