Kodak Miniloader 2000 P, Руководство по обслуживанию

Страница: 87 / 112

3
. Store the result.
Select STORE PARAMETER press ENTER
4
. Exit the SERVICE MODE.
Press BACKSPACE twice
Select QUIT ML2000 SERVICE MODE ............................................... press ENTER
Select Quit the program ............................................................................ press ENTER
SCAN RUN
PURPOSE:
This adjustment calculates automatically the distance between the various FILM POCKET
POSITIONS and stores them in the battery backed up RAM.
NOTE
Do the NEARLY EMPTY adjustment after a SCAN RUN
1
. Start the SCAN RUN
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU .......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed ............................ press ENTER
UNIT DATA are displayed....................................................................... press ENTER
Select CHANGE ML2000 DATA from the MAIN MENU ............... press ENTER
Select CHANGE PARAMETER .............................................................. press ENTER
Select SCAN RUN ..................................................................................... press ENTER
2
. Store the result.
Select STORE PARAMETER .................................................................. press ENTER
3
. Exit the SERVICE MODE.
Press BACKSPACE twice
Select QUIT ML2000 SERVICE MODE ............................................. press ENTER
Select Quit the program ............................................................................ press ENTER
MAGAZINE AREA
MAGAZINE OPENER
PURPOSE:
To fully open and close the MAGAZINES.
1
. Take all PANELS off.
NOTE
USE EMPTY MAGAZINES
2
. Start the MAGAZINE OPENER MOTOR to open the MAGAZINES. .
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU .......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed ............................ press ENTER
SM 3477 ADJUSTMENTS
KODAK AG, Stuttgart 3-41 6/97